Fishing with Rod Discussion Forum

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Guide size and spacing!!!  (Read 16877 times)

bravo252

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 111
Guide size and spacing!!!
« on: November 16, 2007, 11:04:32 AM »
Hi~ Fellas!!

Can any one consult me the guide size and spacing for rod building??!!

I'll get Lami 12feet 3 piece blank soon for cp rod, and 'm thinking 12 guide and tip top.


Please share some good idea~!!


Thanks in advance guys~!!


Bravo~!! ;D
Logged

Jonny 5

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 522
  • Almost the holiest fisher that ever was!
Re: Guide size and spacing!!!
« Reply #1 on: November 16, 2007, 02:35:34 PM »
I have never built a rod in my life (except to cut down a rod for ice fishing), but I have read an article that suggests placing the guides using rubber bands and then trying different spacing until you find a good match for your casting.
Logged

MERC

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 537
Re: Guide size and spacing!!!
« Reply #2 on: November 16, 2007, 02:42:17 PM »
Logged
President Club S. C. & P.

Gooey

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1618
Re: Guide size and spacing!!!
« Reply #3 on: November 16, 2007, 06:30:21 PM »
when building a rod with eyelets on the bottom of the blank (ie spinning, CP, etc) then guide spacing is not nearly as critical.  Consider that guides threads and epoxy add weight, I recomend not using any more than neccesary.

Put the guides on with tape or rubber bands and then load the rod up and look at the bend and how the line tracks along the blank.

My lami (2 piece 11.5') has 11 guides and tip top.
Logged

younggun

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1404
Re: Guide size and spacing!!!
« Reply #4 on: November 16, 2007, 09:02:10 PM »
I once used a custom 10'6 baitcaster that i was lent, it had 14 including the tip and the fight was alot smoother than usual, for 11foot rod i would say 13,14,15 guides should be alright.
Logged
Fish killer 101

mastercaster

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 836
Re: Guide size and spacing!!!
« Reply #5 on: November 16, 2007, 09:53:28 PM »
Just set up my Sage 4120 for the Thompson and counted the guides...same as what you figured 12 plus the tip top.
Logged

bravo252

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 111
Re: Guide size and spacing!!!
« Reply #6 on: November 19, 2007, 02:53:23 PM »
Thanks a lot guys~!! ;D

I couldn't check the forum for couple days~!!

Good informations!!

Thanks again!! ;D

Bravo~

 
Logged

Valley Custom Rods

  • Valley Custom Rods
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
  • Valley Custom Rods
    • Valley Custom Rods
Re: Guide size and spacing!!!
« Reply #7 on: November 26, 2011, 11:20:40 PM »
Quote from: bravo252 on November 16, 2007, 11:04:32 AM
Hi~ Fellas!!

Can any one consult me the guide size and spacing for rod building??!!

I'll get Lami 12feet 3 piece blank soon for cp rod, and 'm thinking 12 guide and tip top.


Please share some good idea~!!


Thanks in advance guys~!!




Bravo~!! ;D

Hi Bravo,
Give this a try,
4.25 - 9 - 14.25 - 20.25 - 26.75 - 33.875 - 41.125 - 49 - 58 - 67.875 - 82.875 - 104.875 in inchs starting from tip. Once tapped in place let me know the measurement from center of the reel seat to the first guide. Contact me at info@valleycustomrods.com and we can make any adjustments  if needed. I hope this helps.
Regards,
Mark
Logged