Fishing with Rod Discussion Forum

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Batson XST Steelhead/Salmon Levelwind Rod  (Read 12869 times)

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1328
Batson XST Steelhead/Salmon Levelwind Rod
« on: September 22, 2013, 06:58:09 PM »
I built this one for one of my fishing buddies. Due to work committments it has taken over 6 months to complete it. It's obviously not perfect, but I'm pretty happy with it.
Blank: Batson XST1263F 2pc - titanium chrome finish











Logged

Sr SQ

  • Full Member
  • ***
  • Offline Offline
  • Posts: 55
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #1 on: September 22, 2013, 07:54:54 PM »
Very nice job, I really like the colour combo and those grips look awesome!
Where do you get the cork from?
Logged

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1328
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #2 on: September 23, 2013, 06:41:17 AM »
Cork is combination of rubberized rings from Andy at rodbuildersupplies, light burl from Mark at Valley Rods, and light burl cork block from Mudhole.


Logged

Sr SQ

  • Full Member
  • ***
  • Offline Offline
  • Posts: 55
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #3 on: September 23, 2013, 07:02:13 PM »
Cool, thanks.
Does the rubberized and burl cork sand like reg cork or is it tougher to shape?
Do you use a chisel/gouge or the likes on the square block, I cant imagine just going at it with sandpaper?
Logged

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1328
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #4 on: September 25, 2013, 08:54:25 AM »
Burl cork is definitely harder than real cork and you do need to be careful at the seams when transitioning.
I use hardwood blocks and curves with sandpaper and make sure that the block stays square at the seams.
This was my first time using cork blocks - I used a gouge to round it off before switching to sandpaper. It can be done with sandpaper (40 grit) but it would take longer and produce more dust.
Logged

Sr SQ

  • Full Member
  • ***
  • Offline Offline
  • Posts: 55
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #5 on: September 25, 2013, 07:21:15 PM »
Yeah I wasnt sure if the cork would tear out with a gouge.
Again great looking job!
Logged

Valley Custom Rods

  • Valley Custom Rods
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 23
  • Valley Custom Rods
    • Valley Custom Rods
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #6 on: September 29, 2013, 10:51:10 AM »
Outstanding workman ship as always. I suspect it's new owner is very pleased.
Logged

Float Drowner

  • Full Member
  • ***
  • Offline Offline
  • Posts: 54
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #7 on: September 30, 2013, 05:10:55 PM »
Beautifully done build.  Where did you get the sticker that says Patience with your logo?  Is it a clear sticker?
Logged
My Biggest worry is that when I'm dead and gone, my wife will sell my fishing gear for what I told her I paid for it!

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1328
Re: Batson XST Steelhead/Salmon Levelwind Rod
« Reply #8 on: September 30, 2013, 05:16:26 PM »
Quote from: Float Drowner on September 30, 2013, 05:10:55 PM
Beautifully done build.  Where did you get the sticker that says Patience with your logo?  Is it a clear sticker?
I printed it on an inkjet printer using clear waterslide decal material.
On a normal (dark) blank you need to add shiny material underneath the sticker in order to see the text/graphics, but the XST titanium finish gives the logo a nice subtle look with black print.
Logged