Fishing with Rod Discussion Forum

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Drag Issue w/ Baitcaster  (Read 2368 times)

mko72

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 155
Drag Issue w/ Baitcaster
« on: July 09, 2015, 10:34:36 AM »
I've got an Abu Garcia Ambasedeur 5600C and I find that the drag is funky. It feels like it's at 100% so you loosen a little bit at a time but it's still 100%
then a little more,
little more,
little more,
still at 100%,
so a little more,
little more,
still 100%,
little more,
bam! all the way off! 0%

When you're playing the fish the reel has almost no give, but then it's got all the give and fish peels off a bunch of line with almost no resistance.

I'm guessing something is worn out.  Thoughts?
Logged

EZ_Rolling

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 398
Re: Drag Issue w/ Baitcaster
« Reply #1 on: July 09, 2015, 10:40:23 AM »
possibly drag washers, I took mine to Mikes and had the upgraded ones put in, cheap and the reel worked great after.
Logged

FlyFishin Magician

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 863
Re: Drag Issue w/ Baitcaster
« Reply #2 on: July 09, 2015, 08:09:42 PM »
Yep, sounds like something's worn out.   ;D ;D ;D

Your reel might need a good cleaning.  If you haven't done this yourself, I'd suggest taking it to Mike's Reel Repair and have them service the reel for you.  There are some vids online that may be helpful to you when cleaning out your reel.  This is a cool video:

https://www.youtube.com/watch?v=xRrP8_kMwEk
Logged

Flytech

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 617
  • Wishin' I was Fishin'
    • The Fish Addict
Re: Drag Issue w/ Baitcaster
« Reply #3 on: July 09, 2015, 08:46:01 PM »
Mikes reel repair gets another vote from me. Great people.
Logged

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1326
Re: Drag Issue w/ Baitcaster
« Reply #4 on: July 10, 2015, 06:18:08 AM »
I had something similar in a used reel I bought.
It turned out that someone had coated the drag washers with so much lube that they couldn't add drag.
A simple cleaning and good as new.
Logged

Tadpole

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 251
  • I'm a llama!
Re: Drag Issue w/ Baitcaster
« Reply #5 on: July 11, 2015, 12:09:10 AM »
 ABU's are bomb proof. Just download yourself schematic from Mike's site by model number. Print it out for convenience, get small flat and Philips screwdrivers and small range. I believe it is 10 mm size. Ambassador supply's this range when you by your reel. It is in a kit.
 Follow assemble/disassemble as per diagram and wash all parts with ISO alcohol. Even your drag washers. Original drag washers are carbon type, but you can upgrade for smooth ones from Mike's. They call them dartanium type. Degrease/clean all the parts and reassemble back as per diagram.
 It is not difficult at all as ABU's are simple workhorse reels. Once a year cleaning is a must if you fish a lot.
 The only parts needed when real problems occur are worm gear and pawl. Pawl you can upgrade to ceramic and it would be your last one.
Logged