Fishing with Rod Discussion Forum

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Jig heads for steelhead  (Read 6240 times)

Matt

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 994
Jig heads for steelhead
« on: December 08, 2009, 11:45:20 AM »
Any shops in the Vancouver area sell jig heads with heavy wire hooks that are suitable for salmon and steelhead?  I don't want to buy the whole jigs already tied, because they cost too much for rock magnets.
Logged

Banny

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 234
Re: Jig heads for steelhead
« Reply #1 on: December 08, 2009, 11:51:59 AM »
Sea run has them normally
Logged

Geff_t

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 2276
  • Cork floats hand made by myself
Re: Jig heads for steelhead
« Reply #2 on: December 08, 2009, 12:45:44 PM »
Hatch Matchers sells the ones from Bent rod.
« Last Edit: December 08, 2009, 12:49:36 PM by Geff_t »
Logged

<*((((((><                        <*(((((((><                       <*(((((((><Give a man a fish and he will eat for a day, teach a man to fish and he will phone in sick to work and fish all day

skunked

  • Full Member
  • ***
  • Offline Offline
  • Posts: 84
Re: Jig heads for steelhead
« Reply #3 on: December 08, 2009, 12:47:17 PM »
bentrods sells some great jig hooks for salmon he also sells the pretied salmon jigs
Logged

Hookbender

  • Full Member
  • ***
  • Offline Offline
  • Posts: 50
Re: Jig heads for steelhead
« Reply #4 on: December 08, 2009, 02:10:06 PM »
Berrys in Richmond have a decent selection
Logged

Gooey

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1618
Re: Jig heads for steelhead
« Reply #5 on: December 08, 2009, 04:05:51 PM »
I cast jig heads...1/8 oz to 3/4.  I use gami hooks (size 2-2/0).  If you want me to cast some up for you, drop me an email.
Logged

Kristopher

  • Full Member
  • ***
  • Offline Offline
  • Posts: 74
Re: Jig heads for steelhead
« Reply #6 on: December 08, 2009, 04:10:20 PM »
I'm sure just about any shop in the area will carry them.  I know Reaction carries the "Aerojig" heads that are cast on Gamakatsu hooks.
Logged

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1326
Re: Jig heads for steelhead
« Reply #7 on: December 09, 2009, 08:41:23 AM »
Quote from: Kristopher on December 08, 2009, 04:10:20 PM
I'm sure just about any shop in the area will carry them.  I know Reaction carries the "Aerojig" heads that are cast on Gamakatsu hooks.
The standard Gami jig hooks are too weak for steel. I have ordered some of their new 2x strong ones (only available in US) and will do a strength comparison against the Matzuo hooks that BR uses.
Logged

Kristopher

  • Full Member
  • ***
  • Offline Offline
  • Posts: 74
Re: Jig heads for steelhead
« Reply #8 on: December 09, 2009, 01:32:40 PM »
I just tied a bunch for a friend and they seem pretty strong.  Have you actually had them bend/break during battles with fish?
Logged

younggun

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1404
Re: Jig heads for steelhead
« Reply #9 on: December 09, 2009, 01:49:22 PM »
i've used gammies and rvrfshr hooks that rod uses (matzuo's) and found that both held fish just fine. gammie 1/0 black #604 or rod's #1 rvrfshr are what i use. 1/4 oz lead head and ur good to go.
Logged
Fish killer 101

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1326
Re: Jig heads for steelhead
« Reply #10 on: December 09, 2009, 02:12:29 PM »
I tied up some jigs using 604's but tossed them when I found Rod's jig kits.
On examination I found the 1/0 shank far too long and far too flexible - a combination that results in lost fish. 
I certainly wouldn't use 1/0 hooks for fish that are often under 10lbs.

Here are the Gami 255's:


http://www.shop.gamakatsu.com/scripts/psp/VB_Bridge3.dll?VBPROG=\bin\shop.prodt.detail&SKU=1576_255
Logged

skaha

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1043
Re: Jig heads for steelhead
« Reply #11 on: December 09, 2009, 04:14:23 PM »
--what size and model # Matzuo is reccomended? thanks
--I have some wholesale sources for Matzuo but no pictures or descriptions just the hook numbers and there are a ton of different style hooks.
« Last Edit: December 10, 2009, 04:58:05 PM by skaha »
Logged

typhoon

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 1326
Re: Jig heads for steelhead
« Reply #12 on: December 10, 2009, 08:01:04 AM »
As far as I can tell the only way to get the heavy Matzuo's in Canada is through Bent Rod's jig kits, available from his site or from just about any fishing retailer in the LM. I have no idea what the model is but I use the #1's.
Ebay sellers and U.S. online retailers seem to only sell the thin wire bass style jig hooks.
Logged

hue-nut

  • Old Timer
  • *****
  • Offline Offline
  • Posts: 828
Re: Jig heads for steelhead
« Reply #13 on: December 10, 2009, 09:11:50 AM »
by far the best deal out there are RVRFSHR pre poured jig heads with the Sickle hooks. I am painting mine this year with Pro Tec powder paint, although they worked just fine last year with plain lead head. In my opinion the only way you are going to bend this hook on a fish is if its fouled. I think that although the 1/0 hook seems big, it is perfect due to the fact that the fish is almost always hooked in the roof of the mouth so the extra gap and shank length help, #1's would be fine but they only come in 1/8 oz.
Logged