Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[flyfisherman]

When tying in the scud-back on a Mustad 37160 #14 I cant keep the scud-back in place, tried giving it more tension, centering it exactly, less tension and keeps slipping off, tried trimming the dubbing at the top of the fly and it seems to work better, I'm using 1/8 scud-back made by Harline Dubbin, it may be too narrow but I feel the 1/4 is too wide for this size of fly.
Heard that using plastic bags cut in strips (freezer lock bags) will be better as it's cheaper and I can cut them to any size I wish.
Any advise would be appreciated

[FLYallAROUND]

a little tip for the scud back and the ziplock bags. once u have cut them to width u like(bags neways), cut a narrow point at the end you will be tying to the hook shank. this way it will not move around so much and the tying should be easier.

[Centerpin]

Hey Flyfisherman:

          I have had the same problem in the past, someone told me to try a little head cement on the underside, not to much or it will act as a lubricant and make things worse. I found that a older bottle of sally hansen hard as nails, that has thickend a little works great.

[The Gilly]

I use Zip-lok sanwich bags.  The plastic is thinner.  I've never had any trouble with tying in the strip.  Lay down a layer of thread along the shank.  You could try some dubbing wax to make it sticky.  Cut the "V" it does help.