Fishing with Rod Discussion Forum
Fishing in British Columbia => General Discussion => Topic started by: dave c on November 06, 2015, 08:09:29 PM
-
Just last year I got away from the cheapo toothpick method and purchased some bobber stops. I fell in love with them. Just recently I purchased some more DNE with the blue holder thing. My previous ones had a yellow holder thing. I've noticed that the new ones slide WAY to easy on my line and I have to continuously adjust them. I use one above and one below the float. It is so bad that quite often on my retrieve the bottom one will slide down to my weight just from the pressure of the float on it during retrieve and I use a Centerpin so the retrieve isn't fast at all. My mainline is 15lb Maxima. Do these stops have different sizing to accommodate different mainlines? Or did I just get a bad batch?
-
Bobber stops come in different sizes depending on what line your using. Sounds like your using the wrong combo.
Why are u putting one on the bottom of your float? If you just had one on the top you could reel the bobber stop all the way up and into the eyelets of your rod to make casting a bit easier. You wouldn't have a bunch of line to deal with and can run whatever depth you want.
-
Yea I think you got the wrong size sounds like.
I pin the bottom of my float as well. Actually I use 2 bobber stops, a small bead, DNE floats, bead, 2 bobber stops. There's been a couple times I've set the hook and the float has shifted. I don't want to be screwing around with my float after missing a take if I didn't prick the fish. The bead is to protect the float from getting reamed by the bobber stops.
I pin the bottom of the float as well because there is times when I want to hold back on my drift and I don't want the float sliding down and lifting my presentation up at all.
-
Bobber stops come in different sizes depending on what line your using. Sounds like your using the wrong combo.
Why are u putting one on the bottom of your float? If you just had one on the top you could reel the bobber stop all the way up and into the eyelets of your rod to make casting a bit easier. You wouldn't have a bunch of line to deal with and can run whatever depth you want.
I tried just using one, however my once perfect vision, now with age, isn't what it used to be. Because of this I cant see the stop when reeling and quite often reel it right through the first eyelet, which causes my once controllable temper to get out of control LOL.
-
I have the same problem with those exact stoppers. I use 17 lb stren and the bigger stoppers won't hold, the smaller ones are tougher to get on but do work. I'm just going to use the smaller ones. I put the bigger one on the bottom, until I use them up, because it's less of an issue if the bottom one slides around.
I use a top and bottom stopper to save my float should I break off.
I do the bead thing too like Noah. Pretty much for the same reason.
-
yellow disc I believe is for 8-12lb test mono. Blue is for 10-20lb mono. Using the ones that are too small will actually damage your mono when sliding it along when your line is dry
Amundson also makes some nice bobber stops. They come in sizes S, M, L and how to tell is by looking on the back by the bar code for the S/M/L so far I like them but have only used L size on 15lb UG, I grabbed a pack of M to try out and see if they stay put better because the ones I have now do slide once in awhile
I do like the DNE ones but figure I'll give the Amundson ones a try for a season and in different sizes
-
Just make your own stoppers using backing.
-
It's like $1.49 for a pack. Figure maybe 2 packs a season at most.
I'll stick to the stops.
-
I prefer the string ones as they fit on all lines, don't get caught in the rod guides when casting, and don't break off / wear out much over time compared to the rubber ones:
http://www.amazon.com/Eagle-Claw-Bobber-String-Knots/dp/B003ZZMD1Q
-
Sweet! Gotta try those.. go right thru eyes without issue eh :D
Would they sell those strings one at local shops too?
-
Yes, A&N and Berry's have them.
Sweet! Gotta try those.. go right thru eyes without issue eh :D
Would they sell those strings one at local shops too?
-
K thnx
-
I can roeel my bobber stop up through three of the eyelets and still cast fine. I fished for a year not knowing this until my friend asked why I was hanging all that line out and not reeling it it...I thought for sure it would spool my baitcaster...he insisted it wouldn't. I gave it a try and he was right...no issues. Not sure if the same would work for a centerpin setup though...but if your using a baitcaster give it a try...just make the first cast a small one so if you do spool it's an easy fix, I have never spooled. Also the guys around you can't tell what length of float your using...it always looks like I am running a 2ft float to hook setup and I get strange looks but whatever...
-
Haha ya I guess ive never tried that either.. :o
I was shown my first year to use a bob stop both above and below float which was a pain to adjust float and it obv couldnt go thru the eyelets. I thought I always had to adjust both stoppers haha, but also think the ones I had were to large to nicely pass thru guides.. Needless to say, I got fed up and have been fine with using the toothpick method ever since
But next time fishing deeper water ill try a small bobber stopper just above the float so I dont have to have so much line out when casting as you mention.
Its funny how you get set on certain methods and never think twice.
Ive also been experimenting this year with other parts of my setup for example split shot, vs pencil lead, vs sliding tungsten weights etc. But thats a whole discussion in itself lol
-
Yes, A&N and Berry's have them.
Look online and just tie your own using backing material. I've done it before but prefer the rubber ones myself
I fish them above/below because if your drifting along and slightly holding back on your travel speed your float will slowly work its way towards your hook. I proved this to a buddy that used to only use one above and now he fishes above/below. Next time your out and fishing and gently slowing your presentation keep a very close eye on your bobber stop and you may see it start creeping upward away from the float.
-
Look online and just tie your own using backing material. I've done it before but prefer the rubber ones myself
I fish them above/below because if your drifting along and slightly holding back on your travel speed your float will slowly work its way towards your hook. I proved this to a buddy that used to only use one above and now he fishes above/below. Next time your out and fishing and gently slowing your presentation keep a very close eye on your bobber stop and you may see it start creeping upward away from the float.
I have seen my float do that. Sounds like it's best to use two stops then unless your fishing some really deep pools and want a long float.
-
Haha if I have to use 2 ill just stick with the toothpick then :P
-
Just make your own. Here's how: https://www.youtube.com/watch?v=MGuhcqyvVx8
-
I prefer the string ones as they fit on all lines, don't get caught in the rod guides when casting, and don't break off / wear out much over time compared to the rubber ones:
http://www.amazon.com/Eagle-Claw-Bobber-String-Knots/dp/B003ZZMD1Q
Tried these ones, Samw??? They're the same price but for 100 instead of 25.....
http://www.amazon.com/Rod-N-Bobbs-Bobber-Stops-Beads-Chartreuse/dp/B003ZZBUPQ/ref=wl_mb_wl_huc_mrai_3_dp
-
Tried these ones, Samw??? They're the same price but for 100 instead of 25.....
http://www.amazon.com/Rod-N-Bobbs-Bobber-Stops-Beads-Chartreuse/dp/B003ZZBUPQ/ref=wl_mb_wl_huc_mrai_3_dp
Just make your own !!!!
Thin stir straws and some backing and tie them while watching TV. Google the Bobber Knot and your set. Very easy to tie and then just toss them all in a little baggy into your vest
You lazy people that just buy everything just boggle my mind.
Download an app for fishing knots and it'll probably have this knot listed. I have a couple apps for the knots I don't use alot and forget how to tie often
-
You lazy people that just buy everything just boggle my mind.
They're a $1.49 for a 12 pack...
-
You lazy people that just buy everything just boggle my mind.
They're a $1.49 for a 12 pack...
cheaper than backing (which I don't have) LOL - before you throw the lazy word around - ask about my jobs and my 30+ volunteer hours a month. ;)
-
Should work fine. I don't actually pick a particular brand. I've used various brands. I just pick what's cheap. Stays on nice and tight (though still adjustable). Just need to use one. You won't even feel it rub against the guides when you cast.
Tried these ones, Samw??? They're the same price but for 100 instead of 25.....
http://www.amazon.com/Rod-N-Bobbs-Bobber-Stops-Beads-Chartreuse/dp/B003ZZBUPQ/ref=wl_mb_wl_huc_mrai_3_dp
-
Just make your own !!!!
Thin stir straws and some backing and tie them while watching TV. Google the Bobber Knot and your set. Very easy to tie and then just toss them all in a little baggy into your vest
You lazy people that just buy everything just boggle my mind.
Download an app for fishing knots and it'll probably have this knot listed. I have a couple apps for the knots I don't use alot and forget how to tie often
I bet the bobber stoppers are cheaper then the backing and straws.
Factor in your time, and I'll gladly buy the stoppers.
-
I bet the bobber stoppers are cheaper then the backing and straws.
Factor in your time, and I'll gladly buy the stoppers.
I also just buy the stoppers however I have had to make these ones on the spot and they were quick and easy and they do work quite well especially tied using braided line.
Straws are free at McDonald's and a 10' piece of backing or braid you'd probably get free if your any sort of regular customer at a fishing store
-
Yup that comment sums you up to a T Hook.
Throwing nickels around like they are manhole covers! Or is it "tighter then a bulls arse at fly time"!
-
Yup that comment sums you up to a T Hook.
Throwing nickels around like they are manhole covers! Or is it "tighter then a bulls arse at fly time"!
You no nothing about me I'm sure. I save money in some ways so I can spend more in others. I also share my time, knowledge or whatever I can whenever possible amongst other things.
Feel free to make an attempt at baiting me into an internet pissing match but it won't work.
Tight lines
-
I do notice that not one person that uses the string ones has mentioned that if you snug them to tightly they lock up on your line quite well but not tight enough and they'll slide like crazy. This is why I don't use them because I have a tendency to snug knots tight
-
I do notice that not one person that uses the string ones has mentioned that if you snug them to tightly they lock up on your line quite well but not tight enough and they'll slide like crazy. This is why I don't use them because I have a tendency to snug knots tight
I've tried string ones that I tied myself. Were easy to see, but found myself constantly tightening them.
-
Try the ones from store. Won't hurt to try. It works well. Once it's on tight, it won't slip and it doesn't loosen itself. You can slide it to adjust it. It doesn't slide as easy as the rubber ones so you just need to pull a bit harder. But I find that to be a feature as it won't slide by itself during hard casts whereas the rubber ones slide over time as they bump the eye on the guides. I've never had one fail yet. You won't even know it's there when casting hard whereas the rubber ones I can hear and feel as they touch the eyes of the guides on its way out on hard casts. If it doesn't work out for you, go back to the rubber ones.
I've tried string ones that I tied myself. Were easy to see, but found myself constantly tightening them.
-
I wonder how this would work with a gear rod set up. Another alternative if you've got an old fly line kicking around.
https://youtu.be/m68rLxSzxPE
-
I wonder how this would work with a gear rod set up. Another alternative if you've got an old fly line kicking around.
https://youtu.be/m68rLxSzxPE
Oooh, I really like that fly line idea !!
-
Here's another video showing it in an indicator rig.
https://youtu.be/IJvAU8-kDAU
-
I put 2 on the bottom and top of the float. Keeps the float from moving. The reason you put them on bottom is if your mainline breaks you don't lose your float too
-
I put 2 on the bottom and top of the float. Keeps the float from moving.
Isn't the whole idea of bobber stops, especially the top one, so that your float does move and you can fish a slip float. If you don't want your float to move, then why not just peg it?
-
Isn't the whole idea of bobber stops, especially the top one, so that your float does move and you can fish a slip float. If you don't want your float to move, then why not just peg it?
I have pegged floats before with toothpicks, sometimes they pop out.
A couple of times I had the main line snap (losing everything including float) when fighting a fish.
I remember the last time I ever pegged a float. I set the hook on a steelhead and after one big head shake the fish was gone With my whole rig. Maybe it wasn't the peg but I haven't had it happen since I switched that day so I continue to use stoppers.
-
really don't like the feel of bobber stopper running thru my guides... so 1 above 1 below !