Fishing with Rod Discussion Forum
Fishing in British Columbia => General Discussion => Topic started by: Randofish on November 24, 2010, 02:44:54 PM
-
Just put one of these babies on order and should have it in a few days.
I've been to the local store a few times to check it out and compared it to some other c-pins there.
It was the nicest there IMO.
Its gonna be sweet and spins the sweetest, can't wait.
They only made 180 right hands and 180 left hands.So don't wait to long if your in the market.
I've been running the steelheader 2 for a dozen yrs now and it runs flawless although I did wear out the handles.
I'm sure the Searun is going to be a sweet ride also.
Anybody got one yet?
Rando
-
your reel came in today.
-
Highwater Tackle in North Van has one, saw it the other day. Does that thing ever spin!
-
your reel came in today.
WooHoo!
-
whats the damage $
-
Is that Islander Searun an upgrade of one their fly reels or of the Islander Steelheader that is float reel.
-
its a remake of the old islander sea run centerpin reel. not much of a difference from the steelheader...the clicker is much better though
-
The difference from the steelheader is that its smaller and narrower.
Or in man terms she's slimmer and sexier :) with a better build ;D
-
For sure , it is a nice reel, but they are still using ABEC 3 bearings (told by Barry's at Islander). But those can be changed to better bearings in the future..
-
Other than it being narrower it's pretty plain Jane and spins basically the same as the IS but I do agree the clicker is better, just don't like the clicker switch. If you're a collector this reel would probably be one your list as there is only a certain number made(for now...).
They are already on there second run of reels. I guess there must be a demand for them.
-
They are already on there second run of reels. I guess there must be a demand for them.
Hey ChromeKings , i guess they are in mass production now. DO you still want a couple of those reels.. ;)
-
the bearings on the Searun don't hum as much as the IS. it's a lot quieter and spins for WAY longer! so much smoother... i play with it at work when i have the chance haha. timed how long it spins for one time and i stopped it after 2 minutes. yea... TWO MINUTES of spinning!
-
Anybody got a pic of one??
-
Anybody got a pic of one??
yah we need pics !!!
-
(http://www.gonefishinshop.com/_MG_5613.JPG) Looks like the handles are placed a little further from the rim compared to the IS...?
-
I played with one today,I usually fish the IS so here are the obiovous differences,first the bearing is much more silent then the IS,spins the same(meaning smoothness) but longer,handels are closer to the center and plastic,I was holding both in my hands IS and Searun they seem to be the same size,exep maybe 1/16 on inch the searun is thinner,but the back of the new searun where the clicker is now positioned seemed to be thicker which makes it heavier I think and leaving the space for line to be substantionally smaller compared to the IS, but again the clicker on the searun might be more handy,and the face is slightly different,position of the holes etc..
Every thing I wrote are my own observations by eye and feel nothing is a facts,but i dought that i'm wrong at anything ;D
BTW I was told there is plenty, so its a fact that there is not just a certain number made.
My personal opinion,same reel as the IS exept 100 some bucks more LOL,was thinking of upgrading but nadda.
-
I run both the IS and now the Searun and alot of others.
I'll let you know how it does.
There are lots of differences between the them.
The Searun is a different ride for the enthusiast.
I'm looking at both right now.
But It's so smooth it must catch fish ;D
Poor little fishies ;)
Gotta go tie up 8)
Rando
-
I had one in my hand this morning, beautiful reel. I have an IS and the Sea Run is a very sweet reel, not sure about the $525.00 price tag though. It measures 4.3" vs. 4.5" and the spool is narrower so you don't need a ton of backing. The clicker is in a nice psition but now there are right and left hand reels due to this and the clicker is not really meant to be on when you're fighting a fish unless you want everyone to know its fish on.
-
The reel worked awsome today.
Coho on my 1st cast to break it in.
Followed by another dozen over the next few hrs.
Runs very smooth and 4 of my fishing buddies already bought theirs.
3 of us running them on 2106 Sages,which is very sweet.
I would recommend one to everybody.
You can get them for $500 tax in if you barter.
Put one on your christmas list if you can ;)
-
There will be 80 rightys and 20 leftys made, so even fewer than was posted above. The serial numbering starts at 100, so numero uno is #100. I got lucky and had a chance to fish a proto-type with a friend and it was a sweet reel. It did have a slight spool wobble that affected casting and was un-anodized but other than that it fished very nicely. That was fixed for the production reels. The productions reels are great too (didn't fish one but my friend with the proto has a production reel now) but seems to have a big gap between the spool and back plate. Much bigger than the proto had. Might be a problem with line slipping in behind. Very nice reel none the less and if I had some extra cash right now I would jump on one.
2 mintues of spinning eh?! Get all the grease out of the bearings with lighter fluid (grease packed bearings) and replace it with sewing machine oil and it will likely spin for four minutes!
-
Hi Zach,You must have some insider info.
I got a left #262 which still doesn't add up to me if there's only 100.
I don't know about the numbering system except what I've heard from where I bought it.
Fin,sorry I missed ya,you a friend of the welshmans?
-
Hmmmm looks like I DID have some insider info but it must have changed. :o I haven't been talking with my friend who is Islander pro-staff since mid October so things must have changed since then? Maybe they did have high demand and put out a second run...?
-
This would also change the collect-ability aspect if there are now more reels out there in circulation.
-
Hey,get outta my spot. ;D ;)
-
I've got an Islander, and enjoy it but I don't like the weak ratchet,or the fact that these reels click on the retrieve with a fish on.
likely these new ones are the same I'm guessing?
if I could get it converted to work like a Silex with the clicker only on when the line is pulled out I would.
I still like the old Silex best,guess I'm old fashioned,the things are tough tho,and they growl like nothing else when you got a nice one smokin down the river!
But the smoothness of the bearings (Islander)is awesome tho,and I know you can get the new silicon bearings for the old Islanders and they are supposed to be way better.
as far as distance casting goes I think the greatest limiting factor here is the tackle, lkely you have a float,so if you've got lots of lead to get it out there you'll need a big float,those fat dink floats don't fly very good and you'll be needing lotsa brake action to stop the over-run, I used to make floats out of cedar,they were more streamlined and heavier,so they fly alot better if you need that extra distance,but it was a real downer when they ended up in the branches!
........is there many Silex guys left out there? (don't worry boys,I can take a hit)
....I don't care if it's a Ford or Chevy,as lond as it get's me to the river.
-
I've got an Islander, and enjoy it but I don't like the weak ratchet,or the fact that these reels click on the retrieve with a fish on.
likely these new ones are the same I'm guessing?
if I could get it converted to work like a Silex with the clicker only on when the line is pulled out I would.
I still like the old Silex best,guess I'm old fashioned,the things are tough tho,and they growl like nothing else when you got a nice one smokin down the river!
But the smoothness of the bearings (Islander)is awesome tho,and I know you can get the new silicon bearings for the old Islanders and they are supposed to be way better.
as far as distance casting goes I think the greatest limiting factor here is the tackle, lkely you have a float,so if you've got lots of lead to get it out there you'll need a big float,those fat dink floats don't fly very good and you'll be needing lotsa brake action to stop the over-run, I used to make floats out of cedar,they were more streamlined and heavier,so they fly alot better if you need that extra distance,but it was a real downer when they ended up in the branches!
........is there many Silex guys left out there? (don't worry boys,I can take a hit)
....I don't care if it's a Ford or Chevy,as lond as it get's me to the river.
If you could find me a left handed Silex, I'd trade in my Islander in a second. Nothing like ol' school IMO
-
I don't think Hardy ever made a left handed Silex.. Looks like it's going to be a left handed Talisman for you! and I'm not that old, but I like old school stuff as well. I still love to use my dad's Silex.
-
Hey guys,
I got the fifth one off the line, the only problem being it had a wobble to it when you spun it.
I sent it back to Islander and was told it was probably just the bearing, so they replaced it and sent it back. It seems a little better, but still does wobble slightly.
Any of you Sea Run owners notice a wobble? I know a few other guys who have.
Pretty sad considering all the other Islanders I own are flawless including the origional Sea Run.
I wonder if I should make due or send it back again.
-
I've got an Islander, and enjoy it but I don't like the weak ratchet,or the fact that these reels click on the retrieve with a fish on.
likely these new ones are the same I'm guessing?
if I could get it converted to work like a Silex with the clicker only on when the line is pulled out I would.
I still like the old Silex best,guess I'm old fashioned,the things are tough tho,and they growl like nothing else when you got a nice one smokin down the river!
But the smoothness of the bearings (Islander)is awesome tho,and I know you can get the new silicon bearings for the old Islanders and they are supposed to be way better.
as far as distance casting goes I think the greatest limiting factor here is the tackle, lkely you have a float,so if you've got lots of lead to get it out there you'll need a big float,those fat dink floats don't fly very good and you'll be needing lotsa brake action to stop the over-run, I used to make floats out of cedar,they were more streamlined and heavier,so they fly alot better if you need that extra distance,but it was a real downer when they ended up in the branches!
........is there many Silex guys left out there? (don't worry boys,I can take a hit)
....I don't care if it's a Ford or Chevy,as lond as it get's me to the river.
The rachet's not a drag, it's just there to stop the spool from free spinning when you take your hand off the reel and can be turned off so you don't hear it when fighting a fish, unless you want to leave it on to let everyone know you're on something. The only time mine is on is when I'm not fishing, moving locations, changing leaders etc.
If you're finding distance to be an issue, it's not a tackle issue, it's probably a casting issue, or you're fishing a rod that's too stiff to load. I used to need a big 35 gram float to get the same distance I can now with an 11gram, and it was all due to technique. Luckily I have a few great teachers that showed me what I was doing wrong, and lots of practice., or worst case if you're leaving the rachet on while casting....
-
Hey guys,
I got the fifth one off the line, the only problem being it had a wobble to it when you spun it.
I sent it back to Islander and was told it was probably just the bearing, so they replaced it and sent it back. It seems a little better, but still does wobble slightly.
Any of you Sea Run owners notice a wobble? I know a few other guys who have.
Pretty sad considering all the other Islanders I own are flawless including the origional Sea Run.
I wonder if I should make due or send it back again.
Send it back again, when you pay for something that cost that much, it should be flawless, no if's and's or but's. I'd tell them you want a totally new reel, I'd demand it, pronto !!!
-
Thanx Bently, thats probably what I will do. Unfortunately the main man at Islander is away until the 20th and I had to deal with someone else. He origionally did tell me he would hand pick one for me but in the mean time these other guys told me it was just a bearing issue so I assumed I would be getting back a perfect reel but that is not the case. I can't believe they would even let that go off the line, quite dissapointing.
-
Thanx Bently, thats probably what I will do. Unfortunately the main man at Islander is away until the 20th and I had to deal with someone else. He origionally did tell me he would hand pick one for me but in the mean time these other guys told me it was just a bearing issue so I assumed I would be getting back a perfect reel but that is not the case. I can't believe they would even let that go off the line, quite dissapointing.
Wait it out, talk to the "main man" and get a new one, and be sure that both of you see it work perfectly before you leave with it.