Fishing with Rod Discussion Forum

Fishing in British Columbia => General Discussion => Topic started by: rjs on October 19, 2007, 04:49:50 PM

Title: aqua seal
Post by: rjs on October 19, 2007, 04:49:50 PM
got a small hole in my breatalbes, from all my searches this is the stuff to use..... but were do you buy it at ?????
Title: Re: aqua seal
Post by: GoldHammeredCroc on October 19, 2007, 04:53:22 PM
Most tackle shops will have it.  Speaking of, I need to get some as well for mine.  Thanks for reminding me.  8)
Title: Re: aqua seal
Post by: rjs on October 19, 2007, 08:11:46 PM
duhh.... I stopped by Crappy tire but they didn't have any, never thought of a tacle shop  :-[
thanks alot ;D
Title: Re: aqua seal
Post by: Geff_t on October 19, 2007, 08:16:04 PM
Yes this is the stuff to use but remember to use it on the inside not the outside of the waders(breathables). Also use rubbing alcohol to find the hole. Saturate the area where you think the hole is and the hole will go black. Put the aqua seal on and put a piece of tape over the aqua seal. This will give it a nice finish. When the aqua seal is dry you can peal the tape off.
Title: Re: aqua seal
Post by: minnie-me on October 19, 2007, 08:45:30 PM
Now thats some good info fly guy, I'll have to try that on Sunday ;)
Title: Re: aqua seal
Post by: rjs on October 19, 2007, 09:24:36 PM
chitt.... I did the outside :o just a dab, as i knew were the hole was ! should I do the inside too again ?
Title: Re: aqua seal
Post by: GoldHammeredCroc on October 20, 2007, 03:37:58 PM
Quote from: fly_guy on October 19, 2007, 08:16:04 PM
Saturate the area where you think the hole is and the hole will go black.

Will the hole go black on the inside or outside of the waders?

Good tip, thanks
Title: Re: aqua seal
Post by: rjs on October 20, 2007, 07:51:52 PM
well today I was getting my stuff ready for fishin for tomorrow and I checked the pouch in the waders and noticed instructions on the pouch how to repair them ! checked the little zippered spot inside the pouch and it had material and the iron on repair tape. what a dummy !!! boy do I feel stupid now ;D
Title: Re: aqua seal
Post by: Geff_t on October 20, 2007, 08:25:14 PM
Quote from: GoldHammeredCroc on October 20, 2007, 03:37:58 PM
Quote from: fly_guy on October 19, 2007, 08:16:04 PM
Saturate the area where you think the hole is and the hole will go black.

Will the hole go black on the inside or outside of the waders?

Good tip, thanks

The hole will go black on the inside only. It really works well.